TANDELTA OQSExISG2, Руководство пользователя

Страница: 46 / 130

Page | 44
8.2.2.1.2 Oil Temperature
Displays the temperature of the Oil as measured by the Sensor.
8.2.2.1.3 Sensor Internal Temperature
Displays the internal temperature of the Sensor.
8.2.2.1.4 Oil Condition
Displays the Oil Condition in either Tan Delta Number (TDN) or Loss Factor (%LF). With no
Sensor connected to the device, the Oil Condition will display as 0 TDN or 45 %LF on Insight. On
the OQDe unit the Oil Condition will display as ‘ - - - - ‘ until a configured Sensor is connected to
the OQDe.
8.2.2.1.5 Oil Life Remaining
The Oil Life Remaining (OLR) will remain as ‘Calculating…’ on Insight for the first 14 days of the
device being connected to a configured Sensor which is submerged in oil. On the OQDe unit the
OLR will display as ‘ - - - ‘ during this period. After this point, both the OQDe and Insight will
display the true OLR in days. This figure will get more accurate as the oil moves towards its
end of life.
8.2.2.1.6 Sensor Info
If a Sensor is connected, you will see the Sensor Info box populated with the Serial Number and
Firmware Version.
8.2.2.1.7 Display Express Info
Displays the Serial Number and Firmware version of the OQDe, along with Uptime, which is how
long the OQDe has been powered on for. The OQDe firmware can be updated manually if
required
by selecting “Upgrade firmware” then selecting the firmware file from the PC /
mobile device storage.
8.2.2.1.8 Display Express Time
Shows the time the OQDe clock is set to currently. It can be set to the time of the browser you
are using to view Insight.
NOTE – this will affect the Timestamps on the Datalogs from the point it is changed.
8.2.2.1.9 Network Info
Displays IP/Gateway/Netmask, as well as the MAC address of the OQDe, the IP mode, and the
Wi-Fi mode (Hotspot or WLAN).
8.2.2.2 Data log Screen
The OQDe has an internal clock and logs real-time oil quality readings. Data logs can be
downloaded here as a CSV file. See Figure 27.
➢
Warning: Do not disconnect the OQDe whilst downloading the Data Log file.