TANDELTA OQSExISG2, Руководство пользователя

Страница: 48 / 130

Page | 46
Figure 29 shows the parameters which are configurable on the OQDe, and the default values
set on the device.
Parameter Options Default
Display Temperature Unit °Celsius or °Fahrenheit °Celsius
Display Oil Condition Unit Tan Delta Number (TDN) or %Loss Factor (%LF) Tan Delta Number (TDN)
Oil Temp High Alarm
Any numerical value – Recommended to
configure before first use , however, can be
adjusted at any time during operation.
115°C
Oil Temp High Warning 110°C
Oil Temp Low Warning -15°C
Oil Temp Low Alarm -20°C
Oil Condition High Alarm
Recommended to configure before first use.
Recommended values depend on Application.
See Figure 28. If your application is not listed,
contact Tan Delta Support.
1140 TDN (Application: Diesel Engine)
Oil Condition High Warning 1060 TDN (Application: Diesel Engine)
Oil Condition Low Warning 400 TDN (Application: Diesel Engine)
Oil Condition Low Alarm 300 TDN (Application: Diesel Engine)
Long term +ve decay rate Warning
It is strongly recommended to discuss your
application with Tan Delta Support before
changing any of these default values.
3 TDN/day
Long term +ve decay rate Alarm 2 TDN/day
Long term -ve decay rate Warning -2 TDN/day
Long term -ve decay rate Alarm -3 TDN/day
Short term +ve decay rate Warning 5 TDN/day
Short term +ve decay rate Alarm 4 TDN/day
Short term -ve decay rate Warning -4 TDN/day
Short term -ve decay rate Alarm -5 TDN/day
Wi-Fi Network SSID Any value
Wi-Fi Password Any value password
IPv4 Address Mode DHCP or Static DHCP
Static IPv4 Address Any numerical value 192 168 1 168
Static IPv4 Netmask Any numerical value 255 255 255 0
Static IPv4 Gateway Any numerical value 192 168 1 1
Device Name (also appears as SSID) Numbers and letters TanDelta OQDe
Clear Datalog TRUE or FALSE FALSE
Clear Settings TRUE or FALSE FALSE
Figure 29 – Default Parameters and Configuration Options
To clear all settings, go to:
Clear Settings > set to TRUE > click Apply > Reboot device by
disconnecting/reconnecting.
The Settings will clear upon reboot. NOTE: It is not recommended to clear settings.
8.2.2.4 Application Settings
By default, the Oil Condition Warning and Alarm levels are set to that of a Diesel Engine.
However, every application is unique, and some adjustments may help optimise the system.
Tan Delta have recommended settings for several applications listed in Figure 30 which you can
use for configuring the OQDe. Alternatively, if a bespoke solution is required, we recommend
logging data for one oil change cycle, or six to eight weeks, and then sending the data to
support@tandeltasystems.com . We can then advise you on your application settings.
Engine
(e.g. Diesel)
Gas Engine Hydraulic Compressor Transmission
High Alarm
5.6mA
(1140 TDN)
5.6mA
(1140 TDN)
6.4mA
(1060 TDN)
6.7mA
(1050 TDN)
6mA
(1100 TDN)
High Warning
6.4mA
(1060 TDN)
6.4mA
(1060 TDN)
7mA
(1000 TDN)
7mA
(1000 TDN)
7mA
(1000 TDN)
Condition OK
Low Warning
13mA
(400 TDN)
9.4mA
(760 TDN)
9.4mA
(760 TDN)
10.5mA
(650 TDN)
10mA
(700 TDN)
Low Alarm
14mA
(300 TDN)
10.4mA
(660 TDN)
10.4mA
(660 TDN)
11mA
(600 TDN)
12mA
(500 TDN)
Figure 30 - Oil Condition Values per Application