TANDBERG STORAGELIBRARY, Руководство пользователя

Страница: 47 / 86

StorageLibrary T40 Installation and User Guide 39
Configuring Barcode Scan
This feature allows the operator to enable or disable the barcode scanner from the front panel
interface or the remote management interface. The default for the library is barcode scanner enabled.
If disabled, the library is forced to initialize slots by touch.
The Barcode Scan is configured during the Setup Wizard. After the initial setup of your library you can
later access the Barcode Scan configuration screens directly:
From the remote management interface, select Setup > Library
From the front panel, select Setup > Library
Configuring Audible Alarm
The library is equipped with an audible alarm that is activated at certain error conditions. The alarm
can be enabled/disabled from the front panel interface or the remote management interface. The
default for the library is audible alarm disabled.
The Audible Alarm is configured during the Setup Wizard. After the initial setup of your library you can
later access the Audible Alarm configuration screens directly:
From the remote management interface, select Setup > Library
From the front panel, select Setup > Library
Configuring SNMP
The library supports system monitoring via SNMP and SNMP Notifications. To enable SNMP the
remote management interface must be running. To enable SNMP notifications you need to register
the IP address of the notification recipient (host).
The library ignores all SNMP SET operations, so external management applications cannot register
themselves to receive SNMP traps from the library. The SNMP notification screen lets you manually
register an external application.
SNMP notification can only be set up by the Administrator from the remote management interface.
The screen lists existing IP address. The Port number is fixed to 162 UDP.
The user needs to register the IP address of the notification recipient in the empty IP address field
displayed on the screen.
If you want to disable SNMP notifications enter 0.0.0.0 in the IP address field. Note that this disables
notification only. The library will continue to process SNMP Get requests as long as the RMI is
enabled.
Note
You need to install the appropriate MIB for your FW version on the host on which
the SNMP manager is running.
The path to open the appropriate screen is:
From the remote management interface, select Setup > Notification
Configuring E-mail Notification
The library can be configured to automatically send e-mail notifications to a specified e-mail address
whenever an issue of a particular severity level occurs with one of its components.