TANDBERG STORAGELIBRARY, Руководство пользователя

Страница: 31 / 86

StorageLibrary T40 Installation and User Guide 23
Browser Requirements . To manage the library from a remote management interface, you must set up
the library’s initial network configuration from the front panel. For information on setting the network
configuration settings for remote use, refer to
Configuring Network Settings .
Menu Trees
The following four menus organize commands into logical groupings:
The Operations menu consists of commands that enable you to change the library’s mode of
operations, import and export cartridges, load and unload tape drives, eject magazines, clean
drive and change partition mode.
The Setup menu consists of commands that you can use to set up and configure various aspects
of the library, including network, partitions, I/E stations, cleaning slots, drive configuration,
license, password, menu timeout, date and time, barcode scan, and audible alarm.
The Reports menu consists of summaries of the values assigned during library setup. It also
includes viewing of RAS tickets and diagnostic logs.
The Tools menu consists of commands that you can use to maintain your library such as restore
default settings, reboot, prepare for shipping, updating firmware, and run system tests.
Figure 14 Front Panel Interface Menu Tree lays out the menu tree for the Front Panel Interface and
Figure 15 Remote Management Interface Menu Tree lays out the menu tree for the RMI.