TANDBERG STORAGELIBRARY, Руководство пользователя

Страница: 21 / 86

StorageLibrary T40 Installation and User Guide 13
Figure 5 Rack Mounting Kit with Rack Mount Ears (Right figure)
Mounting the Rack Mount Ears
To mount the rackmount ears the four magazines must be removed. To remove the magazines follow
the instructions below:
1 Connect the power cord to the power connector on rear of the library
2 Turn on the power switch on the rear of the library
3 Wait till the library completes its power on sequence
4 Use the front panel interface to remove the magazines (Menu > Operations > Eject Magazine)
5 Remove the magazines physically from the library, see section Magazine Handling
6 Mount the ears to the chassis of the library, see Figure 6 Mounting the Rack Mount Ears
7 Gently reinsert the magazines into the library
Figure 6 Mounting the Rack Mount Ears
Installing the Rails in a Rack
Determine the proper position of the rails in the rack.
Caution
Consider rack stability when deciding where to place the StorageLibrary T40.
Hazardous conditions can result from uneven mechanical loading of a rack.
The StorageLibrary T40 uses 4U of vertical rack space. The rails must be installed in a full U position.
The bottom of the rails must be aligned with the bottom of a U.