TANDBERG STORAGELIBRARY, Руководство пользователя

Страница: 27 / 86

StorageLibrary T40 Installation and User Guide 19
During these operations the library continuously shows the map status on the screen. The status of all
magazine slots and the drives are initially unknown, and a ”?” is displayed for each slot. As the robot
searches the magazine slots for cartridges during inventory, the display is updated.
Note
The tape drive needs up to 60 seconds after power on until it’s active on the
SCSI bus. You should turn on the power at least 60 seconds before the computer
system is started.
Note
If the self-diagnostics and the inventory sequence are successfully completed,
the green LED illuminates and the display returns to the home screen. The library
is now ready for further configuration and operation.
If a problem occurs during the power-on sequence, the StorageLibrary T40 displays an error message
on the display. Refer to
Troubleshooting to learn the procedures for resolving the problem.
Labeling Cartridges for the Barcode Reader
You must attach barcode labels to the cartridges if you want to use the barcode reader functionality in
the library.
Caution
You must use StorageLibrary T40-specific barcode labels to ensure reliable
functionality of the barcode reader.
Cartridge labels must be oriented on the cartridges as shown in the figure below with the locking
mechanism to the left.
Figure 13 Positioning of Barcode Label for LTO Cartridges.