TANDBERG 6000 MXP Profile, Руководство пользователя

Страница: 21 / 341

Introduction
7
Column and Base
The codec is located inside the bracket assembly behind the monitor. Inside the column
assembly, there is room for additional equipment, e.g. a VCR or a DVD player. When attached to
the optional Wheel Base, the TANDBERG 6000 MXP Profile becomes a Roll About system that is
easily movable due to its large wheels and handles (located on the back of the monitor).
Remote Control
The hand-held remote control is used to control all functions of the system. The remote control
uses 4 AAA batteries. The system will tell you when batteries are running low. Change the
batteries at the back of the remote control. Please follow the guidelines on the packing material
for handling and disposal instructions for the batteries.
The reach of the remote control signal is 20 meters (65 ft). The remote control IR receiver is
located on the camera. For users working in an open environment with multiple systems
deployed, this can cause other systems to respond to your remote control. Use the little white
switch placed under the batteries to change the reach of the signal from 20 meters (65 feet) to 2
meters (6.5 feet). This will prevent you from unintentionally controlling another video system when
you control your own system.
If the screen saver is activated (black or blank monitor), pick up the remote control and touch the
sides. This will automatically wake up the system.
Microphone
The high quality table microphone is designed to be placed on a table during a video meeting. Up
to three microphones can be connected to the system without additional equipment. The ideal
location for the microphone is on a flat surface at least 2m (6.5 ft) from the front of the system.
The microphone cable should always point towards the system. The system will automatically
equalize sound levels. Loud and soft voices are picked up and transmitted to the far end at
approximately the same level.
Digital Natural Audio Module (DNAM)
The Digital Natural Audio Module (DNAM) is designed to enhance the audio quality during a
videoconference. The DNAM provides natural sounding audio, as if the person or another sound
source in the far end conference room is present in your room.