Tandberg Data StorageLibrary T40 T40 Скачать руководство пользователя страница 69 | Manualshive

Страница: 69 / 95

background image

StorageLibrary Installation and User Guide

61

10

Updating Firmware

The Administrative User can update firmware on the StorageLibrary if required. The latest firmware
versions for the library can be found on

http://www.tandbergdata.com

, Support, choose

StorageLibrary T40 under Tape Automation and download the firmware file to your computer.

You can also regularly monitor the website for firmware updates, but you need to make sure that the
firmware you download is compatible with your library and tape drives.

There are two types of firmware that can be updated on the library: library firmware and tape drive
firmware. This chapter explains how to update both the library firmware and the tape drive firmware.

Updating Library Firmware

With the Update Library Firmware command, you can install new library firmware from the remote
management interface.

Caution

If you choose to update tape drive firmware during this procedure, make sure that
cartridges are not loaded in any of the tape drives. If cartridges are loaded in tape
drives during the update process, the library loses knowledge of the cartridge
home cell in storage, resulting in library and host inventory issues.

Update the library application firmware using the following steps:

1 Download Library Firmware.

Access

http://www.tandbergdata.com,

Support, choose StorageLibrary T40 under Tape

Automation and download the firmware file to your computer.

a. From the home page, navigate to your product s firmware.

b. Verify with technical support or published Release Notes that you are selecting the correct

firmware version to download.

a. Select the appropriate firmware version and download the files to your computer hard

drive.

2 Update Library Firmware.

Update the library application firmware using the Library FW Upgrade command on the Tools >
Maintenance menu from the remote management interface.

a. Browse to the firmware file that was downloaded in Step 1 and apply the selection.

«
...
67
68
69
70
71
...
»

Содержание StorageLibrary T40 T40
































































































Отзывы:

Нет отзывов

Похожие инструкции для StorageLibrary T40 T40

Бренд: Bahco Страницы: 4

Spinpiont HD320KJ

Бренд: Samsung Страницы: 1

TrueNAS R Series

Бренд: iXsystems Страницы: 24

Бренд: Transcend Страницы: 24

Бренд: Lifetime Страницы: 52

Бренд: Dancover Страницы: 12

Бренд: Rocstor Страницы: 45

XCubeNAS XN5016R

Бренд: Qsan Страницы: 64

Бренд: Samsung Страницы: 35

StorageScaler 2460

Бренд: DataDirect Networks Страницы: 46

Бренд: DataDirect Networks Страницы: 106

Бренд: Fantom Drives Страницы: 10

Бренд: Fantom Drives Страницы: 8

G-Force Megadisk

Бренд: Fantom Drives Страницы: 10

Бренд: Safco Страницы: 3

Бренд: Safco Страницы: 2

Бренд: Absco Страницы: 17

Бренд: physa Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды