Product Specifications
AUTOLOADER LTO3 – User Reference Manual Rev. 1.01
TANDBERG DATA
Page 7 2 of 79
Transportation
3 )
According BDT WN-72077
Swept sine applied during non -operation
6 )
5 to 500 to 5 Hz
Table 17
Vibration specifications
1) A 0.3 G
rms
random vibration spectrum is applied to the bottom/top axis for a minimum of 10 minutes per axis.
2) A 1.146 G
rms
random vibration spectrum is applied to each of 3 orthogonal axes for a minimum of 10 minutes
per axis.
3) The autoloader is packaged in its original shipping container. 10 drops: Flat drops on all 6 faces, 1 drop on
most critical product orientation and on all 3 edges from the radiating corner.
4) A 2.1 G
rms
random vibration spectrum is applied to all axis. The unit orientation is bottom side down.
5) The autoloader has been unpacked, but is not operating.
6) 5 sweeps at 1 octave per minute are applied to each axis at 0.5 g (0 . peak) input.
12.5 Shipping Specifications
The autoloader's carton and internal packing pieces are designed so that the enclosed autoloader
does not receive a shock greater than 45 g when the cart on is dropped on the bottom or sides from a
height of 32 inches (81.3 cm). The autoloader.s shipping carton passes the tests described in the
International Safe Transit Association (ISTA) Procedure 2A.
The following table lists the weight and dimensions of the autoloader when it is packed in the shipping
carton. The shipping weight includes the weight of an accessory kit.
Shipping weight
Dimensions (length x width x depth)
26.2 lbs. (11.9 kg)
31 x 23.4 x 9.5 inches
(78.7 x 59.4 x 24.1 cm)
Table 18
Shipping weight and dimensions
Packing instructions are included in the autoloader Installation and Operation manual. To avoid
damaging the autoloader, use the original shipping carton and packing materials (or replacement
packaging obtained from your vendor) when repac king and shipping the autoloader. The shipping
carton and packing materials are not intended to be used for shipping items other than an autoloader.
