Tanco Autowrap 1300 M, Руководство оператора

Страница: 21 / 35

21
Tanco Autowrap 1300 S
Operator’s manual
7.3.5 Channel 5 - Bale Wrapping Rate
Displays number of bales wrapped per hour. The time period over which the rate is averaged may be re-started at
any time.
5.1 Display Bale Wrapping Rate
Press to select .
5.2 Reset Timing Period
Press to select .
Press and hold for 5 seconds.
7.3.6 Channel 6 - Bale Wrapping Speed
Displays instantaneous r.p.m. of the bale wrapper at 3 second intervals in the range 10-99 r.p.m. An overspeed
alarm will sound if the r.p.m. exceeds a pre-programmable limit. The display will default to this channel and flash
for the duration of the overspeeding, subsequently reverting to the 'current/target wraps' display.
.1 Display Bale Wrapping Speed
Press to select .
7.3.6.2 Program the Overspeed Alarm
Switch power on while pressed.
Release.
The third digit flashes.
Hold to cycle to the desired digit, then release, otherwise press once…
The fourth digit flashes.
Hold to cycle to the required digit.