Tanco Autowrap 1300 M, Руководство оператора

Страница: 5 / 35

5
Tanco Autowrap 1300 S
Operator’s manual
1.0 INTRODUCTION.
Tanco Autowrap Ltd congratulates you with the choice of TANCO AUTOWRAP bale wrapping
machine. We are certain you will be satisfied with the machine, and that you will have the
pleasure of your investment for many years.
The TANCO AUTOWRAP bale wrapping machine has more features than any other bale
wrapping machine available. TANCO AUTOWRAP can pick up the bale, wrap and stack them
without the operator leaving the tractor cab. This system is protected by patent laws.
TANCO AUTOWRAP 1300 is hydraulically driven by the tractors hydraulic system, and is
controlled from the tractor cab. The machine can either be mounted to three point linkage, front
mounted with quick-couplers to the tractors front loader or on a wheel loader. Then it's possible
to stack the bales upon each other.
TANCO AUTOWRAP 1300 is designed to wrap bales of grass, hay or straw, with nominal
diameter of 1.1-1.5 m, and weights up to (1200kg). The machine was developed and has been
improved since it’s beginning in 1986, and is now a very reliable and safe machine with high
security built in.
This manual is meant to explain how TANCO AUTOWRAP is prepared, mounted, used and how
it works, and shall together with the spare part's list be a reference for maintenance and
troubleshooting. So take good care of the books, they are a part of the machine.
Read carefully through this manual, and specially chapter 2.0, safety instructions, before starting
the machine, and follow the instructions thoroughly. If problems should occur, check with chapter
16.0, and try to find out what is wrong. Ask your dealer for advice before you make the problem
worse than it is.
* EMERGENCY STOP. Tanco Autowrap 1300 is equipped with a so-called emergency stop
on the wrapping arm. This device stops all functions momentarily, but is per definition not
an emergency stop, because it does not shut down the inputs. But it has the same
function, so we have decided to call it an emergency stop in this manual.
Technical Specifications AUTOWRAP 1300 S
Height in working position, min. / max.
Width, min. / max.
Length, min. / max.
Weight
Wrapping arm speed, recommended
Wrapping arm speed, max.
Bale size, max.
Bale weight, max.
Capacity
Pre-stretcher
Hydraulic connection
Oil pressure / amount, min.
Oil amount, max.
Counter pressure, max.
Electric connection 2420 mm
1300mm
2450 mm
590 kg
22 revolutions' per minute
27 revolutions' per minute
1500 mm Diameter
1200 kg
Approx. 25 bales per hour
750 mm
1 no. Single Acting Service, + free return
1 no. Double Acting Service
180 bar / 15 liters per minute
40 liters per minute
10 bar
12 V DC
Tanco Autowrap Ltd can change the construction and/or technical specifications without warning
and without rights to changes on already delivered products.
© Copyright. All rights reserved. Any copying and reproduction of this manual is not permitted
without permission from Tanco Autowrap Ltd. With precaution of printing failure.