Tanco Autowrap 1300 M, Руководство оператора

Страница: 11 / 35

11
Tanco Autowrap 1300 S
Operator’s manual
4.0
SETTING UP / MOUNTING OF THE MACHINE.
Be careful! There is a danger of being crushed when working implements are fitted and
connected. Carry out the fitting procedures slowly and carefully, and use separate and
approved lifting equipment to make the work easier. See section 2 on safety regulations
and pay attention to the various safety decals displayed on different parts of the bale
wrapper.
4.1 THREE POINT LINKAGE.
TANCO AUTOWRAP 1300 is intended for rear mounting to the three point linkage, category 2.
When attached to three point linkage, make sure the machine is level across the tractor. Tighten
up and lock the lifting arms so there is no sideways movement.
4.2 TOP LINK.
Adjust the top link of the tractor so that the machine is level with the ground. It is recommended to
use a hydraulic top link, as this makes it easy to adjust the angle of the machine.
During the wrapping process it is recommended to tilt the machine towards the tractor, as this will
prevent the bale from falling off the rollers. (See fig. 4-1).
4.3 FRONT MOUNTING.
As extra equipment the machine can be equipped with quick-couplers for front loader or wheel
loader.
(See spare parts list chapter 2-4 for what types of quick couplers there are).
You also need longer hydraulic hoses. (See spare parts list chapter 4-2 for more details).
When front-mounted there must be a large enough counterweight fitted to the three point linkage,
this is to secure the tractors stability.