Tanco Autowrap 1300 M, Руководство оператора

Страница: 15 / 35

15
Tanco Autowrap 1300 S
Operator’s manual
6.1 The standard film dispenser is designed for 750mm film. If using 500 mm film an adaptor is
required which must be ordered separately. See parts book and contact your dealer.
6.2 Height adjustment of pre-stretcher / plastic film.
The plastic film should hit at the middle of the bale wrapped, and therefore it can be necessary to
adjust the height of the pre-stretcher.
6.3
Tanco Dual Stretch Dispenser
Some Tanco Autowrap machines can optionally be fitted with a patented dual stretch gear system.
This system enables a quick change of stretch levels on the Film Dispenser.
If the bolt (1) is fitted in position 2, the top set of gears provide the stretch (70%).
By removing the bolt from position 2 and fitting it in position 3, the bottom set of gears become the stretch gears
giving 32% (for prestretched film) or optionally 55% (for use in hotter climates or with square bales).
Tanco Dispenser Gear Combinations
Inner Gear Outer Gear % Stretch
60 Tooth 35 Tooth 70%
58 Tooth 37 Tooth 55%