TallyGenicom 6300 Series, Руководство по обслуживанию

Страница: 31 / 175

Chapter 2. Menu Operations
25
2.3.1.2.9 All #'s
This option prints lines composed of the # symbol.
2.3.1.2.10 All +'s
This option prints lines composed of the + sign.
2.3.1.2.11 Parens
This option prints lines composed of the left parenthesis followed by a vertical bar followed by the
right parenthesis.
2.3.1.2.12 Rubout
This option prints lines composed of the currently selected fill character.
2.3.1.2.13 Ribbon
This option prints lines composed of rolling ASCII uppercase characters.
2.3.1.3 Plot
This parameter is available in Tech Access only and it contains selections of plot patterns used to
test such things as hammer ball alignment and dot placement. There are five selections for this
parameter.
After you have started one of the tests below, it will run continuously until you depress either the
ENTER Key or the CLEAR Key.
2.3.1.3.1 Grid
This option prints a grid pattern that can be used to check hammer ball alignment. Proper
alignment of the hammer bank components is indicated by clean lines and uniform patterns.
2.3.1.3.2 Cross
This option prints a crosshatch pattern of diagonal lines that can be used to check linearity of dot
placement. Clean lines and uniform pattern are used to indicate linear shuttle action.