TallyGenicom 6300 Series, Руководство по обслуживанию, Страница: 30 / 175

6300 Series Maintenance Manual
24
2.3.1.2 Print2
This parameter is available in Tech Access only.
Except for the
1 Line
test all of the tests below run continuously. They will continue to run until
you depress either the ENTER key or the CLEAR key.
2.3.1.2.1 Paper Save
This option provides a means of completing long-term testing of the printer without wasting large
amounts of paper. It prints a pattern of all uppercase characters that is advanced by one character
on each line. Each pass is four lines long. The printer then backs up three lines and prints another
four line pass. The printer then continues printing in this fashion until it makes 30 passes. On the
30th pass the printer does not back up.
2.3.1.2.2 Paper Save 2
A more efficient version of Paper Save intended to reduce wear and tear on the platen mechanics
by reducing the reverse motion.
2.3.1.2.3 Burn-In1
This is a burn-in test for Production, designed for testing with Mylar. This test prints 28 inches of
240 x 288 DPI plot data, backs up to top of form, and repeats the process. The plot data is
designed to print in 4 sweeps per line, 3 dots per hammer per sweep.
2.3.1.2.4 Burn-In2
This is a burn-in test for Production, designed for testing with paper and ribbon. This test prints
10.5 inches of 240 x 288 DPI plot data, backs up to top of form, and repeats once before moving
to the next page. The plot data is designed to print in 4 sweeps per line, 3 dots per hammer per
sweep.
2.3.1.2.5 Lower
This option prints a rolling pattern of all 95 lowercase ASCII characters.
2.3.1.2.6 1 Line
This option prints one line only of upper- and lowercase characters.
2.3.1.2.7 All H's
This option prints lines composed of the uppercase letter H.
2.3.1.2.8 All E's
This option prints lines composed of the uppercase letter E.