TALEX Sp. z o.o.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. +48 59 821 13 40
e-mail.
User manual
OptiCUT disc mower
Page
14
of
59
for use of the machine in accordance with its purpose. The machine should be used,
maintained and repaired only by the persons familiarized with t specifics of the machine and
health and safety rules.
The manufacturer has a wide variety of agricultural machines, and is also available to advise on
the selection of appropriate equipment based on the user’s needs.
All ambiguities concerning the purpose of the device should be clarified by contacting the
manufacturer. The proper selection of the device and understanding its purpose will
increase the work safety
Using the machine for other than intended purposes shall be considered as a misuse.
4. Description of device
Fig. 2 General view of the disc mower (without tarpaulin cover)
The disc mowers contain three basic components. The first component –
hitch (the suspension
system of the mower)
is made of steel elements connected by welding, which constitute a
compact and strong structure. The second component –
the support frame
made of steel
elements connected by welding, which connects the three main components of the mower’s
frame. The third component –
the cutting bar with the frame and the guard curtains
made of
steel elements bolted and welded, which constitute a rigid system. The cutting bar and the
gears are covered by the safety shields. The machine is equipped with gatherers laying
windrows while cutting.
