Talex OptiCUT 250, Оригинальное руководство пользователя

Страница: 7 / 59

TALEX Sp. z o.o.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. +48 59 821 13 40
e-mail. biuro@talex-sj.pl
https://talex-sj.pl/en
User manual
OptiCUT disc mower
Page 7 of 59

Pay special attention when driving on the public roads and follow the applicable
provisions of the traffic law;

An electric vehicle contour lighting must be used while driving on public roads, checking
its efficiency and visibility, as well as keeping it clean;

A low-speed vehicle triangular plate should be placed on the machine or on the vehicle.
The cleanliness and visibility of the reflective lighting and the warning signs placed on
the structural elements of the machine must be ensured;

Transport speed should be adjusted to condition of the surface of the road, and it
should not be higher than 15km/h;

The vehicle and the mower should not be left on hills or other slopes unsecured from
sliding off on its own. The mower should be placed on the ground. Wheel chocks
should be placed behind the wheels.

The mower should be adjusted for assembling it to the vehicle. It is possible to adjust
the position of the mower from the cabin, without the need to leave the vehicle’s cabin
by the operator.

The activities related to the preparation, assembly, dismantling or adjusting may be
performed after turning the drive off, disengaging the engine, immobilizing the vehicle
and allowing all moving elements to come to a complete stop;

Please check all resealable connections, such as screw connections, after the first hour
of operation;

The mower should be stored on a flat, even, hardened surface in a place not accessible
to bystanders and animals. Use a support for stable positioning of the mower;

During the assembly or the dismantling of the mower special care should be taken,
paying extra attention to the structural vehicle mounting components;

Prior to starting any work, please check the technical condition of the mower and the
attached vehicle. Both, the vehicle and the mower must be in a good technical
condition. Worn or damaged parts should be immediately replaced with new ones.

The mower must be equipped with all guards securing from the access to the moving
parts (the ones suggested by the manufacturer). The guards must be complete and fully
operational;

Please familiarize yourselves with the functioning of the mower prior to putting it into
service by reading the User Manual, work safety rules, as well as the suggestions
regarding the maintenance and the adjustments;

The weight of the mower suspended on the vehicle may alter the steering, therefore
extra care should be taken;

The User Manual should be carried with the machine. When lending the machine, it
should be technically efficient and with attached User Manual;

It is prohibited to attach additional means of transport to the mower;