TALEX Sp. z o.o.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. +48 59 821 13 40
e-mail.
User manual
OptiCUT disc mower
Page
2
of
59
ATTENTION!
Please read this User Manual prior to operating the machine and follow the included safety
rules.
The User Manual is the integral part of the machine!
The Manual should be kept in a safe place accessible to the user and the operator
throughout the entire time of operating the machine,
In case of losing or damaging the User Manual, a new copy should be obtained from the
machine’s retailer or manufacturer.
In case of selling the machine or making it available to other operators, the User Manual
together with the declaration of conformity should be with the machine.
The manufacturer reserves all rights to the User Manual.
Copying, processing of the User Manual or its parts is prohibited without the manufacturer’s
permission.
The first oil change in the gear and pinion should make after the first 50 hours of
operating the machine. Next oil changes shall be made every 500 hours of
operation.
In order to prevent the cutter bar from any blocking due to the sticking dry
residue while starting it, the mower’s cutter bar should be cleaned with water
under pressure after each operation of the machine.
The machine has been equipped with an appropriately selected Power-Take-Off
shaft (PTO). Using any other PTO will result in losing the right to the warranty
coverage, is dangerous for the machine and the surroundings, and it may damage
the mower.
