TALEX Sp. z o.o.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. +48 59 821 13 40
e-mail.
User manual
OptiCUT disc mower
Page
29
of
59
QUICK CHANGE
blade replacement system
For the purpose of fast and efficient maintenance of the mower, the manufacturer created a very simple
system of replacing worn blades –
Quick change
. It is done by using a special type of blade holder,
which is tilted by one lever movement of a special wrench key (included in the basic equipment of the
machine),which then releases a blade.
Fig. 16 Inspection, replacement and turning of blade
Replacement or turning of blade is performed by using a special wrench in accordance with the
Fig. 19. Wrench is placed (picture 16 (1)) between the upper plate of the disc and the blade holder,
the blade holder is tilted until it becomes loose making it possible to remove the blade 16(2). After
inspecting the blade 16 (3), the blade tang and the blade holder (in accordance with the Fig. 18), the
installation of the blade 16 (4) may be performed by turning the blade or replacing it.
The worn or damaged components must be immediately replaced to new ones.
Working with damaged components of the discs, such as the blade holder, blade
tang or blade itself is prohibited.
The inspection of blades must be performed every time prior to starting
work and every time after moving onto an obstacle, such as a stone,
wood, metal.
