TALEX Sp. z o.o.
ul. Dworcowa 9C
77-141 Borzytuchom
tel. +48 59 821 13 40
e-mail.
User manual
OptiCUT disc mower
Page
24
of
59
After adjusting the suspension, adjust the height of cut by adjusting the length of the
connector (1) to obtain the 4÷5˚ angle from the ground. Decreasing the angle causes
increasing the height of cut, Fig. 13.
Fig. 13 Adjusting cut height
There is the possibility of adjusting the pressure on the ground. It may be adjusted by a
spring tension (1) drawing 12 of the suspension. The pressure should be adjusted
individually (2) having in mind the type of surface where the mower is operated.
