TAKASAGO HX-S-G4 Series, Инструкция по эксплуатации

Страница: 179 / 216

Calibration
179
7. Set the constant voltage setting value to [ xV ] and
the external resistance to 10kΩ and set the output
to ON.
30-200 30-400 60-100 60-200
[xV] 1.00V 1.00V 1.00V 1.00V
500-12 500-24 1000-6 1000-12
[xV] 1.0V 1.0V 1V 1V
For how to set, refer to Output Current Control with
External Resistance (B).(page145)
8. Press the FUNC. key.
9. Turn the VOLTAGE dial to display the setting item
number 31 in the Number Display (voltage).
* At that time, "C" or "F" is displayed in the Number
Display (current).
C: Coarse adjustment
F: Fine adjustment
10. Adjust so that the output current becomes
[ yA ]with the CURRENT dial.
30-200 30-400 60-100 60-200
[yA] 200.00A 400.00A 100.00A 200.00A
DMM display
value
50.00mV 40.00mV 25.00mV 50.00mV
500-12 500-24 1000-6 1000-12
[yA] 12.000A 24.000A 6.000A 12.000A
DMM display
value
40.00mV 40.00mV 30.00mV 40.00mV
*DMM display value is the specification of the shunt resistor
The value when had you use.
11. Press the FUNC. key to settle the full-scale
calibration value of output current control (B)
with external resistance.
* Pressing the CURRENT dial switches the
adjustment between "C" (coarse adjustment) and
"F" (fine adjustment).
12. This completes offset/full-scale calibration of
output current control with external resistance (B).
Set the constant voltage setting value and the
constant current setting value to the original ones
and start using.