Takara Belmont Yume Oasis, Руководство по установке

Страница: 18 / 36

■
Carrying The Basin
２
Unpack the wood frame.
１
Remove the resin case (blue).
This work should always be done by two people.
The basin body may fall over if it is not supported when the bolt is removed.
CAUTION
３
When the upper unit is carried
●
Never hold the stepped part under the basin or the main body cover.
Doing so may cause damage to the main body cover.
●
Take care when handling the basin as it is heavy and fragile.
●
Remove all metallic objects such as watches when carrying the basin.
If watches or belts are rubbing against basin, the basin may have a scar.
●
Take extra care to ensure not to damage the covers.
●
Do not touch the basin body pipes.
Doing so may cause water leaks.
The upper unit main has casters.
It can automatically roll down an incline or a slope.
Make sure to place it on a level floor surface.
The basin is unstable when it is not fixed to the floor.
Pay full attention to turnover.
18
４
Attachment of lid
Attach the lid to the floor unit and then tighten the screw
for fastening lid with a straight slot screwdriver.
※
The screw for fastening lid can
be tightened with a coin, etc.
Lid
Screw for fastening lid
Bumper
Basin
Straight slot screwdriver
○
Hold the top end of the basin and the bottom of the bumper as shown in the
image on the right hand when the unit is carried.
○
Carry the unit without removing the air mat mounted on the basin and the film
tapes attached on the main body cover.
○
Do not hold the stepped part under the basin or the main body cover.
Make sure to carry it by two people. (See the image on the right hand.)
CAUTION
CAUTION
４ Carrying The Upper Unit