background image

ADJUST SET TEMPERATURE POINT

The SpaNET intelligent software constantly monitors 
the spa water, automatically controlling the heater 
and circulation pump to ensure the desired set water 
temperature is maintained. The user can adjust the 

o

o

set temperature point from 5 C - 41 C  in steps of 

o

 

o

0.2 C increments (Default: 38 C).

To adjust the set temperature point:

1)

Press and hold

 the 

UP 

(       ) or 

DOWN

 (       ) 

button. The set temperature point will begin 

o

adjusting up or down in 0.2 C increments. 

2) Once the desired set temperature is displayed 

press the 

OK

 (       ) button to confirm selection.

Notes: 1) If the optional in-pool temperature sensor is fitted 

o

the heater works off a 0.5 C hysteresis (thermostat). The 
heater will raise the water to the set temperature point but 
thereafter will not be re-activated until the water 

o

temperature falls by at least 0.5 C. Therefore if the spa 

o

user selects a set temperature point of 38 C the actual 

o

o

water temperature will be anywhere between 37.5 C - 38 C 
depending on when the user checks the temperature.

2) If the standard in-heater temperature sensor is used (i.e. 
no optional in-pool temperature sensor fitted) the heater 

o

works off a 2 C hysteresis (thermostat). The heater will 
raise the water to the set temperature point but thereafter 
will not be re-activated until the water temperature falls by 

o

at least 2 C.Therefore if the spa user selects a set 

o

temperature point of 38 C the actual water temperature will 

o

o

be anywhere between 36 C - 38 C depending on when the 
user checks the temperature.

COUNTDOWN TIMER

The XS-3000 features an integrated countdown 
timer that enables the user to set an audible alarm to 
sound after a user determined period (5-60 minutes). 
The timer will count down the selected period and 
show minutes and seconds remaining on the LCD as 
it does.  The timer icon (     ) will be displayed in the 
top right of the LCD screen whilst the timer is 
running.  Once the countdown time has elapsed the 
topside panel will beep for one minute or until a 
button is pressed. 

NOTE: The pump(s), blower and light 

time-out periods are NOT adjusted by the minute timer.

To start the countdown timer:

1)  Press the 

UP

 (       ) or 

DOWN

 (       ) button to 

toggle the screen to the 

TIMR

 (     ) display mode.

2) Press 

OK

 (       ) to select desired time period.

3)  Press the 

UP

 (       ) or 

DOWN

 (       ) button to 

adjust the timer in minute increments until the
desired time period is selected.

4)  Press 

OK

 (       ) to confirm and begin countdown

.

CLOCK

For convenient user reference and to assist in 
filtration & sleep time functions, your spa controller 
includes a built-in real time clock. The user can 
choose to display the time in either 12 or 24 hour 
format. For ease of reference the current time and 
day is displayed at the bottom left of the LCD 
screen.

To set the clock:

1) Press the 

UP

 (       ) or 

DOWN

 (       ) button to 

toggle the screen to the 

TIME

 (      ) display 

mode.

2) Press the 

OK

 (       ) button to enter set time 

adjustment.

3) Press the 

UP

 (       ) or 

DOWN

 (       ) button to 

select the time format (12 or 24 HR). Press
the 

OK

 (       ) button to confirm selection. 

4) Press the 

UP

 (       ) or 

DOWN

 (       ) button to 

modify the weekday (Mon - Sun). Press the

OK

 (       ) button to confirm selection.

5) Press the 

UP

 (       ) or 

DOWN

 (       ) button to 

modify the hour. Press the 

OK

 (       ) button to 

confirm selection.

6) Press the 

UP

 (       ) or 

DOWN

 (       ) button to 

modify the minutes. Press the 

OK

 (       ) button

to confirm selection.

XS-3000 Quick Reference Guide

OK

Buttons:

1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.

Indicator Lights

13.

Auto Mode LED

14.

Element On LED

15.

Ozone/UV On LED

16.

Sleep Cycle LED

UP
Light

 

(On /Off)

OK
Light Mode
Light (Speed / Colour)
DOWN

o

Invert Display

 

180

Pump A
Pump B

Pump C
Air Blower
One-Touch Sanitise

DISPLAY MODES

The XS-3000 topside panel features a large LCD 
screen which displays three items: (1) Actual Water 
Temperature (2) Set Temperature Point (3) Time & 
Day. By default the actual water temperature is 
displayed in the large digits (refer below). 

There are four possible items that can be displayed 
in the large digits: (1) Actual Water Temperature 
[W.TMP]*; (2) Set Temperature [S.TMP];
(3) Countdown Timer [TIMR]; (4) Time Clock [TIME].
Each display mode has a unique icon shown at the 
top of the screen to indicate the current item being 
viewed (refer below). 

Press the 

UP 

(       ) or 

DOWN

 (       ) button to scroll 

through these different display modes.  As you scroll 
through each item a brief title screen will be shown 
followed by the actual display mode (note change in 
icon).

Note: There is a ten (10) second timeout on viewing non 
default display modes. If no button press is sensed after 10 
seconds the screen will return to the default display. 

LED INDICATOR LIGHTS

The AUTO LED indicator turns ON when 
the filtration pump is in automatic mode.

The Heater LED indicator turns ON when 
the heater element is active.

The Ozone LED indicator turns ON when 
the ozonator / UV sanitiser is active.

The Sleep Cycle LED indicator turns ON when 
in a designated sleep cycle (if programmed). 

AUTO

3

O

zZz

SA SU

 TU WE TH FR

 MO

SET TEMP

SET TEMP

°C

°F

°C

°F

°C

°F

MODE

SPD

BRT

MODE

SPD

BRT

OFF

ON

AM

PM

AM

PM

:

10 30

3 8.0

Actual

Water Temp

W.TMP Display Mode Icon

Time & Day

Set Temp Point

W.TMP Water Temperature*

S.TMP Set Temperature

TIMR

Countdown Timer

TIME

Clock

* Default Display

OK

OK

OK

OK

OK

OK

OK

Safety Notes: 

The appliance must be connected to a suitably rated and 
weather protected power supply. The supply line should be a 
dedicated power circuit and means for disconnection must 
be incorporated in the fixed wiring in accordance with your 
local wiring regulations.

 

Means for disconnection from the 

supply mains should have a contact separation in all poles 
that provide full disconnection under overvoltage category III 
conditions. 

The appliance must be supplied through a 

residual current device (RCD) having a rated residual 
operating current not exceeding 30mA.

 This appliance is 

not intended for use by young children or infirm persons 
without supervision.

SV-3T

13

14

15

16

1

3

4

9

8

5

6

7

10

11

12

2

Отзывы: