Takara Belmont Yume Oasis Скачать руководство пользователя страница 28

Страница: 28 / 36

■

Attachment Of The Surface Water Travel Prevention Cloth To The Shower Hose

CAUTION

2. Align the height of the neck core and

neck cushion ends (both ends).
Fix the hook light pulling the neck cushion on the
under surface of neck core.

1. Align the neck cushion to the center of

neck core as the below.

Check the direction of the neck cushion-and neck core.

Wrap the cloth at the lowest face of the shower hose

with the hook-and-loop fastener facing upward as shown in the right image.

3. Fix the neck core to the neck base and attach.

Take note of the direction to fix the neck core.

〈

Top View

〉

Basin side

Seat side

＜

Side Wash Basin

＞

The slit on the
neck cushion
should face the seat side.

Neck core

Fasten the hook
at the bottom surface
of the neck core

Hook

Align the height

Neck cushion

Neck core

※

The slit on the neck cushion
should face the seat side .

※

Align the center.

Neck base

Seat side

Basin side

Surface water travel prevention cloth

Hook-and-loop fastener side

Lowest face of the hose

Do not force the neck cushion if it does not fit smoothly.

Instead, check the following points.

Forcing the neck core on may cause damage to the neck base or injury to customers.

● Check the neck core insert the direction.
● If the neck cushion is loose, check the direction of the neck cushion toward the neck core.
● If the neck core dowel hole is clogged with dirt, clean and remove the dirt before use.

※

The slit on the
neck cushion
should face the
seat side .

Содержание Yume Oasis





































Результаты поиска

Содержание Yume Oasis

Отзывы:

Бренды по названию

Популярные бренды

Takara Belmont Yume Oasis, Руководство по установке

Результаты поиска

Содержание Yume Oasis

Отзывы:

Бренды по названию

Популярные бренды