Taiden HCS-4100MA/50, Инструкция по установке и эксплуатации

Страница: 228 / 317

213
3.16.4 Operation
1. Number
First of all, make sure that the nameplates are
connected properly to the CMU. All nameplates must
be numbered when the system is used for the first time
or when adding or replacing nameplates. The
numbering function can be activated by nameplate
system software.
Select “Nameplate Numbering” by nameplate system
software, the system now goes to numbering status. All
connected nameplates display: “Numbering…”. Press
key “Power” or “Scroll” of every nameplate one by one.
The screen of numbered nameplate will flash for
seconds and then display the numbered ID. Once all
nameplates numbered, restart the CMU to update the
number information.
2. Device Information
Press and hold the key “Power” for 3 seconds, or click
“Display Nameplate Version” through nameplate
system software, the front screen of nameplates
display the device information. Include: Device ID,
Version and Build. Press the key “Power” or “Scroll” to
exit version display.
Note:

When numbering, please number the
nameplates one by one and do NOT press the
“NUMBER” key of several nameplates at the
same time.