Taiden HCS-4100MA/50, Инструкция по установке и эксплуатации

Страница: 107 / 317

92
3.4.4.2 Chairman unit
The chairman unit features all the functions of a
delegate unit, and the following additional functions:
1. Priority

If the priority mode on the main unit is configured
as “All mute”, all active delegate microphones
(except VIP units) will be muted temporarily when
this key is pressed and they will restore when this
key is released;

If the priority mode on the main unit is configured
as “All off”, all active delegate microphones (except
VIP units) will be turned off and the
request-to-speak list will be purged (under “Open”
and “Apply” mode) when this key is pressed.
2. Speaking

If the active microphone capacity is not full, the
chairman can activate his/her microphone normally,
the operation is the same as for the delegate unit;

If the active microphone capacity is full, the
chairman cannot activate his/her microphone. But
he/she can use the priority key to “All mute” or “All
off” other delegate microphones and give his/her
speech.
3. Controlling delegate unit
A. Approve delegate unit’s request to speak
Without PC and under “Apply” mode, when a delegate
requests to speak, a ring tone will be emitted by the
built-in loudspeaker in the chairman’s unit.
The chairman can now approve delegate’s request and
activate delegate’s microphone by pressing key “YES”
or reject delegate’s request by pressing key
“ABSTAIN”.
At most 6 microphones (default) can request at the
same time. When a request is approved, the last
activated microphone will be turn off at the same time.
B. Turn off or mute delegate microphone
The chairman can use the priority key to execute “All
mute” or “All off” operation.
4. Voting
HCS-48U10CVS(N) chairman unit cannot originate
voting without a PC:

Nominative or ballot voting are available;

“First key-press valid” or “Last key-press valid” are
available;

Voting can be controlled by application software
only. Voting operation of the chairman unit and the
delegate unit are identical.