no picture is
produced
no sound is
produced
sound is poor
quality /
distorted
Check that:
• your television is powered and switched to display your
AV32R
• the correct video input is selected
• you have a composite connection to your television if you
are using a composite source, and an S-Video connection to
your television if you are using an S-Video source
Check that:
• the correct source is selected and the
tape
LED is not lit. The
absence of a digital source will be shown by the diagnostic
message ‘
no input signal’
in the display window
• the volume is turned up to a reasonable level and the output
is not muted (
mute
LED is not lit)
• your source and power amplifier(s) are connected correctly
and turned on
If an analog input is selected:
• reduce the sensitivity of that input via the on-screen menus
(1)
For all inputs:
• check that all cables are making a good connection.
If necessary, withdraw the connector and plug it back
in again (turn the power off before you do this)
• make sure that you have set the speaker type to suit your
system by using the ‘Set-up Wizard’
operational difficulties
86
operating manual
1. Please refer to the
Set-up Manual
for details on how to do this
GRR00892.01-AV32R OPER 3.7x 6/14/02 9:35 AM Page 86