67
T
A
Gtronic Communications Bus
operating manual
This feature allows remote commands received by the AV32R to
be sent to other suitably equipped TAG McLaren units via the
TAGtronic Bus.
To enable this feature, press the
menu
key and select
Change
Set-Up
,
TAGtronic Bus
then select
AV32R
. The
Remote Commands
setting can then be toggled from
Off
to
On
.
This feature allows all TAGtronic units that support this feature to
match the intensity of their displays with that of the AV32R.
To enable this feature, press the
menu
key and select
Change
Set-Up
,
TAGtronic Bus
then select
AV32R
. The
Sync. Brightness
setting can then be toggled from
Off
to
On
.
When linked together with a TAGtronic cable it is possible to
control the mute, standby and channel switching functions of up
to two 100x5R
(1)
from the AV32R. This allows you to control one
or two 100x5R without having ever to switch them on or off
(2)
.
To enable these features, press the
menu
key and select
Change
Set-Up
, select
TAGtronic Bus
then select
100x5R
.
relay remote
commands from
A
V32R
synchronise
display
brightness to the
A
V32R
100x5R
amplifier link
1. The 100x5R must be programmed with software version v3.00 or higher
2. The 100x5R includes a so called standby transformer which makes the 100x5R
very economical when switched into standby. There is no need to switch the
100x5R completely off, using the power button on the front panel
GRR00892.01-AV32R OPER 3.7x 6/14/02 9:35 AM Page 67
