85
operational difficulties
operating manual
no lights on unit
blue power LED
is glowing dimly
the unit
responds
erratically or
not at all to the
remote
front panel
display is blank
Until you are familiar with the operation of your AV32R, you may
from time to time experience difficulties in its operation. The
following will help you overcome some of the most likely problems.
Check that:
• the AC power cord is plugged in and that the AC mains
outlet it is connected to is turned on
• the power button is pushed in
• the display is switched on
• the TAGtronic programming cable is not connected
The unit is in ‘standby’ mode. Press any button on the front panel
or the
standby
key on the Remote to bring it out of standby mode.
Check that:
• the AV32R is switched on
• there are fresh batteries in the AV32R Remote
• the Remote pickup window is visible and you are pointing
the Remote towards it
• the AV32R is selected as the unit to control. Press the
REMOTE SELECTION av
key
Check that:
• The display is not turned off. Press the
display
button on the
front panel or the
display
key on the Remote.
GRR00892.01-AV32R OPER 3.7x 6/14/02 9:35 AM Page 85