20
using the
A
V32R
remote control
controlling
the
A
V32R
remote active
acknowledgment
cd
dvd
amp
vcr
ld
tv
sat
av
R E M O T E S E L E C T I O N
1. Please see the ‘
programming the remote control
’ section later in this manual for
further details on how to do this
2. If you have not yet installed batteries in your AV32R Remote, then do so now.
Please refer to the
Set-up Manual
for details on how to do this
The AV32R is supplied with the AV32R Remote, which is
a ‘learning’ Remote Control unit. This is supplied pre-programmed
for TAG McLaren home cinema products, but may easily be re-
programmed to control other devices using an infra-red remote
control (such as our audio components) within your home audio
and audio-visual system
(1)
.
For optimum performance from the Remote Control you must point
it towards the Remote Control pick-up window on the front panel
of your chosen unit
(2)
.
Before controlling any particular unit with your AV32R Remote,
you must first select that unit. To control the AV32R with the
Remote press the
av
button in the
REMOTE SELECTION
area at
the top of the AV32R Remote. This key will light briefly in red
to confirm your selection. The AV32R will remain selected until
another unit is chosen via the
REMOTE SELECTION
keys.
Once the AV32R has been selected, it can be controlled in its
entirety from the Remote Control. The red ‘Remote Control active’
LED on the front panel of the AV32R will flash when commands
from the AV32R Remote are received.
using the
A
V32R remote
operating manual
GRR00892.01-AV32R OPER 3.7x 6/14/02 9:34 AM Page 20
