Operating the Phone
36
T207M / T208M User Guide
Making Internal Calls
During a Call
The following features are available during an internal call:
[PgQ]
Page Queue
places your call on hold by sending it to one of ten Page Queue destinations. You are then free to
page all the system members from your phone and announce that there is a call for Mr. Doe on a specific Page
Queue Line. The call can be picked up from any system station. See
Page Queue on page 156
.
[Xfer]
Transfer
passes your call to another destination. Pressing
[Xfer]
places the called party on Hold. Dial a number
(internal or external), and disconnect to transfer the call, or first announce the call and then disconnect. See
Transfer (Xfer) on page 196
.
[Hold]
Hold
places the active call on hold. See
Hold on page 132
.
[Mute]
or
MUTE
Mute
can be activated during a conversation to mute your side of the conversation (handset, headset and
speaker-phone). When this feature is activated by the
[Mute]
or
MUTE
on/off toggle switch, a bullet appears to
the left of
[Mute]
and
MUTE
LED is lit red. The mute feature deactivates the microphone for your
speakerphone and handset or headset. Press the toggle key again to reactivate the microphone.
(see
Mute
Microphone on page 155)
.
[Wait]
Calls Waiting
can be used to view the number of calls waiting for you during a conversation. See
ACD and UCD Hunt Groups on page 59
.
[Park]
Park
your call at your station so that you can pick it up at another system station. See
Park on page 164
.
[Num]
Number
is used to briefly display the caller’s dial number instead of the name.
ANSWER 2nd party name or number
↓→
PgQ
Xfer
Hold
Mute