Station Telephony Features
127
T207M / T208M User Guide
Group Calls: Forced Release of a Participant
Group Calls: Forced Release of a Participant
This feature allows an authorized user, from idle, to release a participant from an ongoing conference. The feature does not
allow the user to view the list of participants.
Releasing a single participant:
1. Press
[GpCl]
[RlsP]
.
2. Listen for the dial tone.
3. Dial the participant number or press the programmed DSS key.
4. Press
[fRls]
- no confirmation tone will be heard.
5. Press
[Exit]
to exit.
The group operator can also release a participant from an ongoing conference provided that the operator is authorized to
release Group Call participants in the COS.
Releasing a participant (Group Call Operator):
1. Press the preprogrammed
RELEASE MEMBER
DSS key during an established conference; the corresponding DSS key is
lit.
NOTE!
See
page 167
for instructions on how to program a DSS key. To program an RELEASE MEMBER
key, use feature code #1305.
2. Press the member’s preprogrammed DSS key.
NOTE!
You cannot manually dial the internal/public/private library number.
3. The member is disconnected from the conference.
The member’s DSS key is extinguished at the Group Operator’s station.
4. The member returns to
Idle
state.
