Station Telephony Features
134
T207M / T208M User Guide
Individual Remote System Services (IRSS) - Freedom
Placing IRSS Calls:
For IRSS calls placed from phones that send Caller ID, the IRSS feature must be enabled at your Coral station. See steps
below.
For IRSS calls placed from phones that do not send Caller ID information, the IRSS feature must be enabled using the
Executive Privilege feature.
See
page 134
.
To place a call from IRSS phone providing Caller ID:
1. Place a call to your desk phone. Listen for the distinctive dial tone.
2. If a passcode is required (as defined by the Class of Service), enter it now.
3. At the dial tone, dial the number of the person you wish to call.
Possible destinations can be
external number (stationary or cellular) or network number, or a Coral destination, including
station, trunk/trunk group, dial service, routing access, public/private library, voice mail
.
If your destination is an external number, it should be preceded by the outside line access code.
You can activate any of the options described in the table on
page 136
.
To place a call from IRSS phone that does not provide Caller ID:
This applies for IRSS calls from off-site phones that do not possess a Caller ID number and, therefore, cannot be identified by
the Coral.
NOTE!
Some telephones may be denied the Executive Privilege feature (defined by Class Of Service).
In order to use Executive Privilege your station must be defined with a passcode.
1. Place a call to the Executive Privilege number (contact your system administrator for that number).
2. Listen for the dial tone.
3. Dial your own Coral station number.
4. Dial your 4-digit passcode. Listen for the distinctive dial tone.
5. Dial the required destination number.
