Station Telephony Features
156
T207M / T208M User Guide
Page Queue
Page Queue
Page Queue allows you to park a call (up to ten calls can be multi-parked simultaneously) on designated Page_Q numbers by
sending the call to one of ten Page Queue destinations. Once parked, a call can be either retrieved at another station or you can
page someone else to pick up the call at any station or group of stations. You can page any system member from your phone
and announce that there is a call for Mr. Doe on Page Queue Line x. The call can be picked up from any system station by
dialing the Page Queue access code (default access codes are 7060-7069).
NOTE!
To pick up the call, Mr. Doe should dial from any station to the relevant Page-Queue number
(default numbers 7060-7069). If the call is not picked up within a predetermined time, it will
automatically return to the originating station from which Page Queue was placed.
The party placed on Page Queue may hear one of the following: music, recorded tone, busy tone or no sound at all, as defined
system-wide for each Page Queue.
To place a call in Page Queue:
1. While on a call, press
[PgQ]
to access the Page Queue options
,
2. Press a free
[PgQx]
(
ten options
see
Table on page 159
) to send the call to Page Queue number
x
.
3. Listen for the confirmation tone.
Page 1
EXT ANS
2nd party
↓→
[Pg Q]
Xfer
Hold
Mute
Page 2
Page_Q Place/Pickup
↓→
PgQ1
PgQ2
PgQ3
PgQ4
