Tadiran Telecom Coral Sentinel Pro, Инструкция по установке и справочное руководство, Страница: 47 / 72

Sentinel Pro Installation Procedure and Reference Manual - for Coral IPx / FlexiCom Coral Sentinel Pro Web Portal 37
Configuring the Sentinel
Pro (Setup)
5
Table 10 Sentinel Pro
MGCP Configuration
Parameter Description
Call Agent setup
Call Agent 1 The Sentinel PRO needs to be registered to a call agent (CA)
in order to operate.
Enter the IP address of the default call agent (Coral PUGW
card, UGW-E card, or UGW card).
Call Agent 2
Call Agent 3
Call Agent 4
Call Agent 5
Call Agent 6
Call Agent 7
Call Agent 8
Call Agent 9
Call Agent 10
The survivability feature enables the Sentinel PRO to
automatically switch to an alternative call agents if its default
primary call agent is not available, and return to the primary
call agent.
Enter the IP address or addresses of up to nine backup call
agents.
NOTE: In total, IP addresses for up to 10 different
PUGW/UGW-E/UGW cards can be configured.
Call Agent Port The call agent port dedicated for MGCP signaling data.
Select
2427
or 2727.
Call Agent In Use The IP address of the currently used call agent (read-only
field).
Presentation Mode (Virtual mode Address)
Base Virtual IP
Address The lowest value in the range of IP addresses used for the
virtual representation of endpoints in the Sentinel Pro.
Example: 172.28.102.1
Number of
Virtuals IP
Address The number of virtual IP addresses that can be used for the
virtual representation of endpoints in the Sentinel Pro.
Example: Number of 26 provides the range of
72.28.102.1 to 72.28.102.26
Last Virtual IP
Address The highest value in the range of IP addresses used for the
virtual representation of endpoints (read-only field).
Example: 172.28.102.26
Virtual Endpoint
Port The virtual port used on the Sentinel side for transmitting
MGCP signaling data. Select
2427
or 2727.