Tadano GT-550E-2, Руководство по эксплуатации и обслуживанию

Страница: 27 / 100

Keep Away from Moving Parts
Inadvertent motion of the machine, or contacting a
moving part can cause personal injury and even
death.
When necessary to inspect or maintain the machine
while running, do not approach moving parts such
as the boom, elevating cylinder, winch, fan, fan belt,
and propeller shaft, etc.
Keep hands and clothing away from moving parts.
Beware of an Overheated Cooling
System
Do not unfasten the radiator cap while the engine
cooling water is hot. Hot steam and water can spurt
out, causing burns.
First allow the radiator to cool down. Then, loosen
the cap very slowly while facing away to release the
internal pressure.
Lock the Inspection Hole Covers
An inspection hole cover that remains open can be
closed abruptly by a gust, etc., causing hands or a
leg to be caught and injured.
If an inspection hole cover or access door, or the
operator’s cab door must remain open, secure in po-
sition.
Do Not Allow Tools and Parts to Drop
When working through an inspection hole while fac-
ing down, be careful not to drop objects into the
hole. Such mistakes can damage or lead to malfunc-
tion of the machine. Do not keep objects which are
not needed for inspection in open pockets.
Recover any object or tool that has dropped into the
machine.
Beware of Oil Smears
Oil smears on the clutch, lining and brake disks can
decrease braking effectiveness. Always keep these
assemblies free from oil accumulation.
Beware of Dust
Be careful not to inhale dust during inspection or
maintenance work. To inspect or maintain brakes
and linings, remove dust using a vacuum cleaner.
Do not use compressed air because this action will
scatter dust into the air.
T019605E
A-26
Safety Rules Safety Rules
T00046
T00044