T038300E
38
AML (Overload Prevention Device)
AML (Overload Prevention Device)
Selecting Number of Part-lines of Rope
[NOTICE]
◆
If the registered number of part-lines of rope is
smaller than the standard number, a maximum al-
lowable lifting load is limited, depending on the
registered number. In case the number is registered
as ‘0’, however, a process takes place as if the stan-
dard number were registered.
◆
Similarly, a process takes place on the basis of
the standard number of part-lines of rope if the reg-
istered number is larger than the standard number
or other than the values specified for your model.
◆
When the power supply is turned on (i.e. PTO switch
ON), the standard number of part-lines of rope corre-
sponding to a work condition is selected.
Register the number of part-lines of rope by use of the
number of part-lines of rope select key, as follows:
1.
Press the number of part-lines of rope select key.
The number of part-lines of rope symbol will flash, and
the number of part-lines of rope will be shown on the jib
angle display in a flashing mode.
2.
Press the increase or the decrease key to set the
number of part-lines of rope at a desired value.
◆
When the increase or the decrease key is pressed, a
numeral showing the number of rope changes from
flashing to being marked up, showing a fixed value for
the increase or decrease.
◆
When the increase or the decrease key is kept
pressed, the number of rope continuously increases or
decreases.
3.
Once the intended number of part-lines of rope is
set, press the register key and register the number.
Then, the number of part-lines of rope symbol is turned
off and the jib angle display returns to a normal status.
◆
The number of part-lines of rope can be confirmed by
pressing the display alteration key.
t
max t
m
m
T24154E
Number of part-lines of rope
Number of part-lines of rope indicative symbol
Increase key
Decrease key
Number of part-lines of rope select key
Register key
Содержание GT-550E-2
