Tadano GT-550E-2 Скачать руководство пользователя страница 24

Страница: 24 / 100

Meet with Working Personnel

Working together with other persons on inspection

or maintenance tasks without observing mutually

agreed upon procedures can result in an accident.

Meet with all involved personnel to agree on the de-

tailed tasks. Also, assign a work leader, and always

follow his or her instructions.

Provide Effective Ventilation

Performing inspection or maintenance work in a

confined space without effective ventilation can lead

to toxic poisoning.

Be very careful when handling fuel, wash oil, and

paint.

When starting the engine in an enclosed space, pro-

vide a means of positive ventilation. Connect a hose

from the exhaust to vent the fumes outdoors. Open

doors and windows to allow fresh air circulation.

Install a ventilator as required.

Fire Prevention

To prevent the risk of fire during inspection and

maintenance work requiring handling of potentially

flammable substances, observe the following in-

structions.

• Use a non-flammable cleaning liquid to wash

parts and components.

• Store fuel and oils away from fire.

• Do not allow sources of flames or sparks near any

substance that is combustible.

• Do not smoke cigar or cigarette.

• Always carry a fire extinguisher in the operator’s

cab.

• When checking fuel, oils, and battery liquid, use

an explosion-proof lamp.

• When grinding or welding, keep flammable sub-

stances away from flying sparks or molten metal.

About Illumination

Inspection or maintenance work in a poorly illumi-

nated environment can lead to injury. Before

starting the work, provide proper illumination.

Never use the exposed flame of a match or lighter

for illumination, a fire accident may occur. The emit-

ted gas from open lead storage batteries can

explode.

Use explosion-preventive type illuminating devices

when checking fuel and battery liquid level.

T019605E

A-23

Safety Rules

T01951

Содержание GT-550E-2





































































































Результаты поиска

Содержание GT-550E-2

Отзывы:

Похожие инструкции для GT-550E-2

Бренды по названию

Популярные бренды

Tadano GT-550E-2, Руководство по эксплуатации и обслуживанию

Результаты поиска

Содержание GT-550E-2

Отзывы:

Похожие инструкции для GT-550E-2

Бренды по названию

Популярные бренды