INTRODUCTION DOMUS MODULE
The
DOMUS
expansion consists of a
DOMUS
MODULE and up to three
RELAY
MODULES. The
DOMUS
module
expands the control board with three open collector outputs. Each output controls a relay module. The
DOMUS
module
has a
push-button
K1
to select the outputs menu and three LEDs:
L1, L2
and
L3
. Each LED is linked to a relay status. The LED is ON
when the corresponding RELAY output is closed . The
DOMUS
expansion may be used to control a variety of different
applications, as for instance
timed lights controlled by remote
,
courtesy lights
,
flashing lamp
,
electric-lock
,
traffic lights
, and
extending an alarm system
.
TYPICAL APPLICATIONS
LIGHTS
The lights can be controlled by terminal block input,
remote key and/or gate status. The most useful functions
are: ON, ON/OFF, ON from 0 to 99 Seconds / Minutes /
Hours.
DOMUS
controls up to 3 lights. The lights can be
controlled with a single command with different function
for each output (I.E. Turn On output 1 and Turn Off
output 2).
ELECTRIC-LOCK
For this application you need of an
external DC power
supply
and an
electric-lock
. The electric-lock can be
controlled by terminal block input, remote key and/or
gate status. This application can be used to control
additional electric-lock.
EXTERNAL DEVICE
A control board with the
DOMUS
can command one or
more external devices. The command can be sent by
terminal block input, remote key and/or gate status. For
instance this application can be used to open or close
more devices at the same time.
www.tecnoautomazione.com
Pag. 15 / 17