DTC-300 Getting Started Guide
Page 46
1
In the software, click
Results
>
Post Analysis
>
Reanalyze
a Calibration
.
2
Select the calibration file to be reanalyzed.
3
Modify the thickness of all necessary samples and then click
OK
.
Figure 21
Setpoint information.
4
A Calibration Changes window displays, asking if you would like to create a new file to save the changes.
Click
No
to terminate the reanalysis, or click
Yes
to continue.
5
A Sample Information window displays. Update the information, if needed.
6
If the Sample/File ID field is left unchanged, a window displays asking to overwrite the file. Click
Yes
to overwrite the file or
No
to terminate reanalysis.
7
Reanalyzed calibration results display.
