DTC-300 Getting Started Guide
Page 14
DTC-300 Back Panel
The DTC-300 back panel has five ports. Figure 3 below shows the rear connections and Table 2 provides a
description of the function of each port.
Figure 3
DTC-300 rear panel connections.
Table 2:
DTC-300 Back Panel
Port
Function
USB
Provides communications to the Temperature Measurement
System
RS232
Provides communication to the PID Heater Control System
DRAIN
Removes condensing water (when needed)
AIR IN
Provides the air or inert gas used to operate the DTC-300
pneumatics
MAIN POWER port
Provides power to the instrument
MAIN POWER switch
Powers the DTC-300 ON (
I
) / OFF (
0
)
MAIN POWER port
USB
RS232
AIR IN
DRAIN
MAIN POWER switch
