T-Drill PLUS 115 CU, Инструкция по эксплуатации

Страница: 23 / 65

PORTABLE
COLLARING SYSTEM
23
PLUS 115
6. Start the drill by squeezing the trigger of the T-65. The forming pins are automatically
extended until they reach the collaring position. When the collar is completed after approx.
5 minutes, the rotation of the lead screw inside the lead screw assembly stops automatically.
Press the locking pin down to release the T-65, turn and lift it straight up to remove it from
the adapter.
7. Lift the lead screw assembly together with the collaring head from the
PLUS 115 unit. Remove the PLUS 115 unit from the base plate by turning the orange locking
lever for 90° to the right. Loosen the locking levers of the ring clamp, open the ring clamp
and remove the base plate from the tube.
8. The end of the branch tube is now to be
dimpled. The PLUS 115 package includes a
dimpling feature which place two dimples
one atop the other on the tube branch. One
dimple is used as a depth delimiter and the
other as a point of inspection. The dimples
must be made on both sides of the tube and
parallel to the axis of the tube.
NOTE!
¨
Make sure that the dimpling tool is “bottomed out” on the tube wall.