T-Drill PLUS 115 CU Скачать руководство пользователя страница 5

Страница: 5 / 65

PORTABLE

COLLARING SYSTEM

PLUS 115

1. NOTES ON THE USE OF THE INSTRUCTION MANUAL

1.1 GENERAL

This instruction book contains the instructions for use, maintenance and setting of the

T-DRILL PLUS 115 capacity expanding attachment for the T-65Cu Collaring Machine.

Before proceeding with the operation of the machine, read the safety instructions in

chapter 2 “General safety instructions.

1.2 SYMBOLS AND WARNINGS

IMPORTANT! Gray base color is used to emphasize an important detail

NOTE!

May cause an accident or damage other property, if the right

precautionary measures have not been taken.

DANGER! Will or may cause a serious accident or death, if the right

precautionary measures have not been taken.

This instruction manual includes instructions for set-up, operation and maintenance of

the T-DRILL tee forming machine.

NOTE!

Before carrying out any actions, read chapter 2 ”Safety Instructions”.

Acquaint yourself with the machine before using it.

Read the operation sequence

described in the instruction manual thoroughly before preparing, operating or

maintenance of the machine.

IMPORTANT! Save these instructions for future use!

1.3 SYMBOLISM

Read the instruction manual attentively before carrying out

installation, operation, setting or maintenance of the machine.

Double insulated.

Warning! Do not throw to trash. Please recycle

Warning! Watch your fingers. Rotating tool!

Содержание PLUS 115 CU


































































Результаты поиска

Содержание PLUS 115 CU

Отзывы:

Похожие инструкции для PLUS 115 CU

Бренды по названию

Популярные бренды

T-Drill PLUS 115 CU, Инструкция по эксплуатации

Результаты поиска

Содержание PLUS 115 CU

Отзывы:

Похожие инструкции для PLUS 115 CU

Бренды по названию

Популярные бренды