T-Drill PLUS 115 CU, Инструкция по эксплуатации

Страница: 22 / 65

INSTRUCTION
MANUAL
22
9.3. USING PLUS 115
1. Lubricate the forming pins of the collaring
head and retract the pins into the shank.
Place the collaring head into the PLUS 115
unit so that the keys of the collaring head
lock into the grooves in the PLUS 115. Turn in
a clockwise direction only!
2. Bring the collaring head lower to the
collaring start position by rotating the
adapter counter-clockwise by hand.
3. Before engaging the lead screw, it must be
rotated to the full length by hand. Engage the
lead screw onto the collaring head so that
the drive pin of the shank is in the groove of
the lead screw.
4. Chuck the T-65 onto the adapter and turn the tilt rod assembly counter clockwise against
the stop pins on the PLUS 115 unit.
5. Turn the speed selector knob on the T-65 to position I . You may have to “pump” the
trigger to get it engaged.