T+A PDP 3000 HV, Руководство пользователя

Страница: 68 / 82

68
Safety notes
All the components in this device fulfil the currently valid German and European
safety norms and standards.
We ensure that our products are of consistently high quality, and meet all
specifications, by checking all materials rigorously for quality, using meticulous
production methods and subjecting each unit to a fully automatic computer-
controlled final inspection.
For your own safety please consider it essential to read these operating
instructions right through, and observe in particular the notes regarding setting
up, operation and safety.
Installation
The unit must be set up in such a way that none of the connections can be
touched directly (especially by children). Be sure to observe the notes and
information in the section
'Installation and Wiring' .
Operation
Never operate the disc player without the pressure puck in place.
Before closing the drawer, place the pressure puck centrally on the disc.
Ensure that the puck is level, horizontal, and lies squarely on the disc. If the
puck is not straight, please be sure to correct this before operating the Close
button.
Closing the disc drawer without the pressure puck in place, or with the puck
incorrectly positioned, may result in damage to the disc and the device.
Caution when closing the disc drawer INJURY HAZARD !!!!
The drawer opens or closes slowly when you operate the OPEN/CLOSE
button. Please ensure that nothing - such as your fingers or any object - gets
into the drawer, or comes between the drawer fascia and the device.
Operating the Open/Close button a second time stops the drawer immediately,
and reverses its direction of travel.
Power supply The mains power supply to which the unit is connected must be grounded
properly and must meet the current regulations. The power supply required for
this unit is printed on the mains supply socket. The unit must never be
connected to a power supply which does not meet these specifications. If the
unit is not to be used for a long period disconnect it from the mains supply at
the wall socket.
Mains leads / Mains plug
Mains leads must be deployed in such a way that there is no danger of damage
to them (e. g. through persons treading on them or from furniture). Take
particular care with plugs, distribution panels and connections at the device.
Unplugging the mains plug will disconnect the device from the mains for service
and repair. Please make sure that the mains plug is easily accessible.
Enclosure openings
Liquid or particles must never be allowed to get inside the unit through the
ventilation slots. Mains voltage is present inside the unit, and any electric shock
could cause serious injury or death. Never exert undue force on mains
connectors.
Protect the unit from drips and splashes of water; never place flower vases or
fluid containers on the unit.
Supervision of device
operation
Like any other electrical appliance this device should never be used without
proper supervision. Take care to keep the unit out of the reach of small
children.
Service, Damage
The case should only be opened by a qualified specialist technician. Repairs
and fuse replacements should be entrusted to an authorised

specialist
workshop. With the exception of the connections and measures described in
these instructions, no work of any kind may be carried out on the device by
unqualified persons.
If the unit is damaged, or if you suspect that it is not functioning correctly,
immediately disconnect the mains plug at the wall socket, and ask an
authorised

specialist workshop to check it.