65
H
LINK
Control input / output for
H
LINK
– systems:
Both sockets are equivalent
– one is used as input, the other one serves as
output towards other
H
LINK
devices.
LAN
Interface for diagnosis work and computer-controlled operation of device
functions. (Home-Automations-Systems e. g. CRESTRON, AMX).
DIGITAL IN
Inputs for digital source devices with optical, coaxial (RCA / BNC) or AES-EBU
digital outputs.
At its optical (Opt 1 und Opt 2) digital inputs the
PDP 3000 HV
accepts digital
stereo signals (S/P-DIF signals) with sampling rates from 32kHz up to 96 kHz.
At the coaxial digital input Coax 3 and the BNC and AES-EBU inputs
(AES/EBU 4 and BNC 5 / 6) sampling rates in the range 32 to 192 kHz are
supported.
DIGITAL OUT
Digital coaxial output for connection to an external digital/analogue converter
with a coaxial cable.
It is not always possible to produce a digital version for all media, as in some
cases the original contains copy protection measures which prevent this.
USB DAC IN
Socket for connecting a PC or MAC computer.
At this input the
PDP 3000 HV
accepts digital
PCM
stereo signals with
sampling rates in the range
44.1
to
384 kSps
, and digital
DSD
stereo signals
from
DSD64
to
DSD512*.
*
DSD256
and
DSD512
only with a Windows PC.
If you wish the
PDP 3000 HV
to convert audio files from a Windows PC
connected to it, you must first install the appropriate drivers on the computer.
No drivers are required if you are using a Linux or MAC computer (see the
chapter
‘USB DAC operation in detail’
).
Mains input
To avoid any coupling of unwanted noise signals from the digital power supply
to the analog power supply of the MP 3000 HV, the digital and analogue power
supplies are located in separate shielded compartments on the left and right
sides of the device. For best possible separation the power supplies have their
own separate power supply sockets.
Always connect
both
mains sockets to the mains supply when operating the
PDP 3000 HV
.
Digital power supply
The mains lead for the digital power supply is plugged into this socket.
Analogue power supply
The mains lead for the analogue power supply is plugged into this socket.
For correct connections refer to the sections
'Installation and wiring'
and
'Safety notes'
.
Содержание PDP 3000 HV
