T+A PDP 3000 HV, Руководство пользователя

Страница: 51 / 82

51

To change the plain-text name, move to the appropriate line and press the

button. Now use the alpha-numeric keypad of the F3001 to change the
name as required, then confirm your choice with

; this saves the settings
for that source.
The

button is used to switch between numeric and alpha-numeric input,
and between capitals and lower-case letters.
Letters can be erased by pressing the

button.If you should wish to restore
the factory default source name, erase the whole name before saving the empty
field with the

button: this action resets the display to the standard
source names.


Display Brightness
menu item
(screen brightness)

At this point you can adjust the brightness of the integral screen to suit your
personal preference for normal use.


Display Mode
menu item

This menu item offers the choice between three different display operation
modes:

Always on

Temporary

Always off
Selecting 'Temporary' will switch the display is on for a short while each time
the PDP 3000 HV is being operated. Shortly after operation the display will be
switched off again automatically.

The brightness of the display can be adjusted separately with the menu item
'Display Brightness' (see above).


Language
menu item

In this menu item you define the language to be used for the displays on the
screen of the front panel of the
PDP 3000 HV .


Output configuration
Menu item
This menu point is used to determine whether DSD and PCM encoded material
is played in common via the DSD (All Format Out) output, or separately via
their own outputs (see wiring diagrams in Appendix A).
True
DSD for DSD64
Menu
item
For reasons of operational security the True DSD technique is normally
blocked for DSD64 signals, but this menu point can be used to determine
whether you also want the

True DSD technique to be available for DSD64
signals fed via the USB input.

ATTENTION!
Before you activate True DSD for DSD64 please read the warning notes in the
chapter entitled
“Basic settings of the PDP 3000 HV / D/A converter
settings
”
. If you are not certain that your amplifier and your speakers are
suitable for this mode of operation, it is essential to set this menu point to the
“OFF” setting.