1
Unpacking
3
Connections
2
Operating Your Remote Control
5
Basic Playback
4
Connecting to the Mains Socket
1
2
3
4
5
6
7
8
9
MENU
0
ZOOM
MUTE
SOURCE
DISPLAY
SUBTITLE
REPEAT
TITLE
AUDIO
ANGLE
PROG
POWER
OPEN/CLOSE
REV
FWD
VOL+
PREV
NEXT
VOL–
SETUP
PLAY/PAUSE
STOP
OK
GOTO
1
2
3
4
5
6
7
8
9
MENU
0
ZOOM
MUTE
SOURCE
DISPLAY
SUBTITLE
REPEAT
TITLE
AUDIO
ANGLE
PROG
POWER
OPEN/CLOSE
REV
FWD
VOL+
PREV
NEXT
VOL–
SETUP
PLAY/PAUSE
STOP
OK
GOTO
DVD Player x 1
Remote Control x 1
Instruction Manual x 1
Quick Start Guide x 1
Remove all packaging from the unit. Retain the packaging.
If you dispose of it please do so according to any local regulations.
DVD Player with HDMI
TM
GB
Thank you
for purchasing your new
Sandstr
Ø
m DVD Player.
Please follow this quick start guide for a
successful first time set up.
We recommend that you spend some time
reading the instruction manual in order to
fully understand all the operational features
it offers.
Read all the safety instructions carefully
before use and keep the instruction manual
for future reference.
S1DVD12E
1. Press and lift the back cover to open the battery compartment of the
remote control.
2. Insert two AAA size batteries (not supplied).
3. Close the battery compartment cover.
Install the batteries correctly by following the polarity (+ and -) indications in the battery
compartment.
If you have any difficulties, please refer to the instruction manual.
1. Plug in the mains plug into the mains
socket after you have completed all the
connections.
3. Press the POWER button on the unit or the remote control to switch
the unit on. “LOAD” will show on the display.
2. The unit will enter STANDBY mode. LED
indicator will illuminate red. “OFF” will
show on the display.
1. Press the OPEN/CLOSE button to open the disc tray, place a disc with
the label facing up.
2. Press the OPEN/CLOSE button again to close the disc tray.
3. If the disc does not start playing automatically, press the
PLAY/PAUSE button.
4. Depending on the disc, a menu may appear on the TV screen by pressing
and holding the ZOOM/MENU button on the remote control.
Press the buttons on the remote control to select menu options and
press the OK button on the remote control to start, or press digits to select
a menu options directly.
5. To eject the disc, press the OPEN/CLOSE button.
You will find that there are many exciting features available.
To get to know all these features, please take some time to read the
instruction manual provided.
Tip:
QSG-S1DVD12E-120723V3
Quick Start Guide
SCART OUT
COAXIAL
HDMI OUT
TV
Audio Device
SCART Cable (not included)
COAXIAL Cable
(not included)
HDMI Cable (not included)
Method 1
Method 2
S1DVD12E_QSG_7L_120724-1.pdf 1 25/07/2012 2:25 AM
