SY120SA Series Operating Manual
© 2004 by SYRIS Technology Corp.
6
2.7.3
Configure single card’s group setting
1.
Enter[FUN][3][3](NNNN)(G)[EN]
(NNNN):amend card group number; Range : 0001~2000
(G):give card group code; Range :1~4
2.7.4
Configure single card’s setting
1.
Enter[FUN][3][4](NNNN)(S)[EN]
(NNNN):give card status number; Range :0001~2000
(S):S = 1 use to set card;
S = 0 use to set stop card enter.
2.7.5
Add multiple cards
1. Enter[FUN][3][5](NNNN)(G)[EN], if correct and response to wait proximity card.
2. Keep response the add card ,if correct and continue,if card are already login or full and will
response error status and continue add card.
3. Finish all add card and press [EN]to exit
(NNNN):add card group start number; Range :0001~2000
(G):add card group code; Range :1~4
*Add card number will be start and response step by step until 2000
*After add card and will be seeting in the same group code.
2.7.6
Delete multiple cards
1.
Enter[FUN][3][6](NNNN)(EEEE)[EN]
(NNNN):start delete group card number; Range :0001~2000
(EEEE):the end of delete group card number; Range :0001~2000
2.7.7
Configure multiple cards’ group setting
1.
Enter[FUN][3][7](NNNN)(EEEE)(G)[EN]
(NNNN):amend card group number; Range :0001~2000
(EEEE):amend card group end number; Range :0001~2000
(G):new group card code; Range :1~4
2.7.8
Configure multiple cards’ setting
1.
Enter[FUN][3][8](NNNN)(EEEE)(S)[EN]
(NNNN):amend card status card number; Range :0001~2000
(EEEE):amend card status end number; Range :0001~2000
(S):S = 1 for setting card;
S = 0 for setting stop card