SY120SA Series Operating Manual
© 2004 by SYRIS Technology Corp.
4
2.3
Modify card’s password
[Access with car and password mode]
1. Present the Prox. card to controller which the one user wants to modify, wait for
confirmation from controller. if the card had setup a password, the controller will wait for
password entered and stop reading function until the password had been varified. If the card
didn’t setup any password, the controller will open the door automatically.
2.
Follow the sequence of (pppp) (nnnn) (nnnn)[EN], wait for the confirmation from controller.
If correct, system will show correct message and change previous password to new one.
(pppp): use old password or original system password;
(nnnn)(nnnn): new password needs to be entered twice.
[Password enter mode]
1.
Follow the sequence of (NNNN)(pppp)(nnnn)(nnnn)[EN], wait for confirmation from
controller ,if correct then the old password will be changed to new one and show “correct”
message..
(NNNN): Valid card number. The range are in between 0001~2000.
(pppp): Previus password or system original passowrd; Defualt: 0000
(nnnn)(nnnn): new password needs to be entered twice.
2.4
Method of Deactivate alarm
1. Deactivate alarm status is the same as access
2.5
Activate/Deactivate security system
[needs in login mode]
2.5.1
Deactivate security system
1. Enter[FUN][0][EN], if correct the “OK” LED will twinkling.
2. Present valid card, if correct system will check the configure of the security system’s setting
weather needs to enter password or not.
3. If new enter password and response waiting enter password status,keypasd enter and check
card password.
4. If not need enterpassword or card password correct andwill remove guard system(normal
ststus)
